UV Exposure Unit (EXR-250)
Features
This compact UV exposure unit is ideal for exposing pad printing plates. The UV lamps are located at the bottom of unit so the photosensitive side of plate must be placed face down on the exposure surface. When the lids are closed, pressure is applied against artwork film and plate together to ensure good contact. Set your exposure time then press start to activate exposure cycle.
-
Light source:
4 x 8W UV lamps
-
Max. exposure area:
170 x 260 mm
-
Pre-set timer:
0 second ~ 10 minutes
-
Suitable for:
Thin steel and polymer plates
*Please note that actual output may be affected by print requirement, ink drying condition, load,unload arrangement, pad stroke speed, pad hardness, production setup, product quality and production control.
